Designed Specifically For Drag Racing
Thru-hardening maximizes the torsional strength of Hy-Tuf axles
This also reduces the flexibility necessary for street driving
Packages For Street & Track – P3109F05 / P3509F05
Application
2005-2014 Mustang
With OEM housing ends and GT disc brakes
Aftermarket Differentials & Spools
33 spline will vary on design
Specify manufacturer to ensure proper fit
35 spline requires 30° pressure angle
** Will not fit Mark Williams spools
See Description Tab below for additional Specifications.
Select options
This product has multiple variants. The options may be chosen on the product page
Designed Specifically For Drag Racing
Thru-hardening maximizes the torsional strength of Hy-Tuf axles
This also reduces the flexibility necessary for street driving.
Bear’s Performance Products race axles are forged from “HY-TUF” alloy steel originally developed for highly stressed landing gear in military aircraft. All axles are precision machined to exacting standards. All machining operations (except bearing journal & wheel flange) are finished prior to heat treat. “HY-TUF” AXLES ARE FOR COMPETITION USE ONLY. Please fill out and submit and axle order form with your order. Also see axle packages if you require bearings and studs.
Please note your order will not be processed unless Axle Order Form is completed.
$10,999.95–$12,399.92Price range: $10,999.95 through $12,399.92 CAD
H-1182
Pro Mod Floater Housing
Includes stainless steel brake kit
• Available in 16″, 17″, 18″, 19″, 20″, 21″, 22″, or 23″ 4-link centers
• Choice of 4 3/4″, 5″, or 5 1/2″ bolt circle
4-Link Plates, Axles, & Center Section Sold Separately
Advantages
• Housing supports weight, bending loads, and tire shake
• Axle shafts only requirement is to transfer torque
• Prevents the possibility of axle flange breakage
• Extremely rigid assembly increases gear life
• Lighter than comparable fabricated steel housings
See Description Tab below for more Specifications
Select options
This product has multiple variants. The options may be chosen on the product page
Bear’s Mild Steel Fabricating housings are one of the strongest on the market. Perfect for mid to high horspower applications. This housing is completely TIG welded to your specifications.
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This 4130 housing is TIG welded and utilizes 3 1/4″ x .250″ 4130 tubes and is 40″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and 4130 brackets to finish it off. Complete housings also available.
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This 4130 housing is TIG welded and utilizes 3 1/4″ x .250″ 4130 tubes and is 40″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and 4130 brackets to finish it off. Complete housings also available.
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This Mild Steel housing is TIG welded and utilizes 3 1/4″ x .250″ 4130 tubes and is 50″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and brackets to finish it off. Complete housings also available.
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This Mild Steel housing is TIG welded and utilizes 3 1/4″ x .250″ DOM tubes and is 40″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and brackets to finish it off. Complete housings also available.
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This 4130 housing is TIG welded and utilizes 3 1/2″ x .250″ 4130 tubes and is 40″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and 4130 brackets to finish it off. Complete housings also available.
Bear’s 4130 Fabricating housing are one of the strongest on the market. Perfect for mid to high horsepower applications. This housing is completely TIG welded to your specifications.
Key Features :
3 1/4″ x .250″ or 3 1/2″ x .313″ wall 4130 tubes
Internal rear brace
faceplate supports
1/4″ 4130 brackets
Large filler & Drain Installed
4130 rear brace installed
housing ends installed
Bracket supports, gussets, tie downs, anti-roll tabs available as upgrades.
Please complete and submit our Custom housing form and we will contact you with final pricing.
New HD 9″ center with 3″ x .250″ wall tubes. Fill/drain/brace and ends installed. Built to your specs and choice of ends. please complete Housing order form when ordering.
New 9″ HD housing with 3″ x .250″ axle tubes and face plate studs installed. Housing ends of choice included (Conv. Ends extra) and can be installed if required (additional cost). Housings built as ordered to your Specs. All Bear’s housings are fixture mounted and TIG welded.
After online order is placed one of our sales staff will contact you to finalize housing width and pinion location.
Select options
This product has multiple variants. The options may be chosen on the product page
