C6 Slip Yoke – 1350
$172.50 CAD U-1655Fits C6 transmission, 31 spline, 1350 series joint.
Due to current market conditions, website pricing may not be up to date.
No products in the cart.
Showing 689–704 of 923 resultsSorted by popularity


Fits large seal Turbo 400, 2nd design T10 and 4L80E – Spicer H.D. 1350 series (5.5″ joint CL – end).

Application
Ford 9″ using 35 spline pinion gear
Can be used with solid driveshafts
Inner Spline
35 spline – 30 degree pressure angle
Outer Spline
20 spline – Mates with most aftermarket male couplers
Overall Length – 3.120″

Application
Drag Race pinion supports
Able to accept a 35 spline pinion – N1921 / N1922
Includes all HD Pro, Ultra Case, & Billet Case supports
Features
• Billet chrome moly 4340 steel
• Black oxide finish
• Accepts 1480 series u-joint
• Fits Ford 9″, 9 1/2″, and 10″ 35 spline Pro gears
Related Components
U-bolt kit…….. U1611
HD cap kit…… U1611HD
1480 u-joint… U1639

Application
Ford 9″ with 28 spline pinion shaft
Using 1350 series u-joint
Features
Heavy Duty Nodular Iron Casting
– Superior in strength compared to cast iron
– Additional material in critical areas
– Fits Ford 9″ 28 spline pinion shafts
– Dust shield installed
– Designed & machined by Strange Engineering
– Cast in USA


Applications
Dana: Dana 60 – U1598
Ford: Ford 8.8 – U1596
GM: Chevy 10 bolt – U1594
Chevy 12 bolt – U1601
Olds / Pontiac – U1606
Note:
Yokes were redesigned in mid 2014 to accept this ring
If unsure – Check with a Strange Engineering Sales associate
Will Not Fit Other Manufacturers Yokes

Applications
Dana: Dana 60 – U1598
Ford: Ford 8.8 – U1596
GM: Chevy 10 bolt – U1594
Chevy 12 bolt – U1601
Olds / Pontiac – U1606
Note:
Yokes were redesigned in mid 2014 to accept this ring
If unsure – Check with a Strange Engineering Sales associate
Will Not Fit Other Manufacturers Yokes

Applications
Dana: Dana 60 – U1598
Ford: Ford 8.8 – U1596
GM: Chevy 10 bolt – U1594
Chevy 12 bolt – U1601
Olds / Pontiac – U1606
Note:
Yokes were redesigned in mid 2014 to accept this ring
If unsure – Check with a Strange Engineering Sales associate
Will Not Fit Other Manufacturers Yokes

Ford 9″ with 35 spline Pro gears
Using Strange yokes listed below
Chrome moly 1350 yoke… U1604
Billet C/M 1350 yoke………. U1604B
Billet C/M 1480 yoke………. U2304
Note
Will Not Fit Other Manufacturers Yokes
For 28 Spline Pinion – See U1613-8

Computer sensor ring for pinion yoke (4 magnets), for U-1604 yoke.

Computer sensor ring for pinion yoke (2 magnets), for U-1604 yoke.

Application
Ford 9″ with 28 spline pinion
Using Strange yokes listed below
Chrome moly 1350 yoke… U1603
Billet C/M 1350 yoke………. U1603B
Note
Will Not Fit Other Manufacturers Yokes
For 35 spline pinion – See U1614-8
Other Collars
Ford 8.8 / GM 10 & 12 bolt / Mopar / Olds… U1617-8

Application
Ford 9″ with 28 spline pinion
Using Strange yokes listed below
Chrome moly 1350 yoke… U1603
Billet C/M 1350 yoke………. U1603B
Note
Will Not Fit Other Manufacturers Yokes
For 35 spline pinion – See U1614-4
Other Collars
Ford 8.8 / GM 10 & 12 bolt / Mopar / Olds… U1617-4

Application
Ford 9″ with 28 spline pinion
Using Strange yokes listed below
Chrome moly 1350 yoke… U1603
Billet C/M 1350 yoke………. U1603B
Note
Will Not Fit Other Manufacturers Yokes
For 35 spline pinion – See U1614-2
Other Collars
Ford 8.8 / GM 10 & 12 bolt / Mopar / Olds… U1617-2

GM 8.5 rear end
Using 1350 series u-jointFeaturesHeavy Duty Nodular Iron Casting
– Superior in strength compared to cast iron
– Additional material in critical areas
– Designed & machined by Strange Engineering
– Cast in USAAccepts 1350 Series U-Joint
– Larger u-joint than ever offered by OEM
– U-joint available in non-cross drilled design