Due to current market conditions, website pricing may not be up to date.
No products in the cart.
Showing 737–752 of 918 resultsSorted by popularity
Key Features :
All clips are UNWELDED and universal fit. Some welding required.
Key Features :
All clips are UNWELDED and are universal, welding required.
Mandrel bent crossmember, 2″ x 3″ x .083″. Crossmember is 60″ wide.
S-9015Â brackets welded to these universal fit mandrel bent Ladder Bar frame rails are 2″ x 3″ x .083″ and can be used in virtually any application, sold in pairs.
Universal fit mandrel bent ladder bar frame rails are 2″ x 3″ x .083″ and can be used in virtually any application, sold in pairs.
Bear’s Ladders Bbars are among the best in the industry and come completely welded and assembled. Includes Adjustable shock mount brackets for 3″ or 3 1/4″ axle tube and 1/2″ or 3/8″ shock mount.
Key Features :Â – 1″ x .156″ seamless tubing – jig welded to ensure perfect alignment – forged rod ends (lifetime warranty) at housing for maximum strength – 34″ long from axle centerline to front rod end – powder coated for long term durability – adjustable lower bar for pinion angle adjustment.
Bear’s Ladders Bbars are among the best in the industry and come completely welded and assembled. Includes Standard L-Bar brackets for 3″ axle tube
Key Features :Â – 1″ x .156″ seamless tubing – jig welded to ensure perfect alignment – forged rod ends (lifetime warranty) at housing for maximum strength – 34″ long from axle centerline to front rod end – powder coated for long term durability – adjustable lower bar for pinion angle adjustment.
This round tube crossmember kit fits most applications. Bent from 1 3/4″ x .134″ DOM and includes mounting tabs, front ladder bar brackets and grade 8 hardware. Crossmember width is 48″ with 3″ drop.
Bear’s Sportsman Anti-Roll bar kit is perfect for Strret Stip applications. Features 1″ x .156″ DOM tube, MS welded arms, Billet bearing loops with needle bearings for smooth operation. Chassis mounting tabs, 4130 link tube kit, rod ends and hardware included. Will fit 16″-23″ in arm centerline. Some welding required.
1/2″ NAS 4-Link bolt kit.Includes 8 NAS-19 bolts with 1.178″ grip and grade 8 thin nylocks and AN washers. Works for 1/4″ thick brackets with 3/4″ gap.
Bear’s 4-link Suspension package is designed to give you everyhting you need to install a complete 4-link in your car. Designed for low to mid HP applications. Upgrade to 1/4″ MS brackets available.
Includes :
All components available separately.
Bear’s 4-link Suspension package is designed to give you everything you need to install a complete 4-link in your car. Designed for low to mid HP applications. Upgrade to 1/4″ MS brackets available.
Includes :– 1 1/4″ x .095″ 4-link tube kit- 3/16″ MS housing (3″ or 3 1/4″ tubes) & chassis brackets- AM Rod Ends- Upper and Lower Shock Mounts- Diagonal Link Kit- Grade 8 Hardware- Strange single adjustable shocks w/spring rate of your choice.
Bear’s Pro Bar 4-link clip (UNWELDED) if perfect for the do-it-yourselfer for Low HP race applications.
Rod Ends NOT included.
Kit Includes :4-Link frame rails / 2″ x 3″ cross-member / D-shaft loop / 1 1/4″ 4130 tubes / Tube Adapters / MS Housing Brackets / MS Chassis Brackets / Wishbone Kit / Upper & Lower Shock Mounts / Grade 8 Hardware / Strange Single Adjustable Shocks and spring rate of your choice. Welding Required. All components available separately. Due to size of rails additional shipping charges will apply.
Bear’s Pro Bar 4-link clip (UNWELDED) if perfect for the do-it-yourselfer for Low HP race applications.
Rod Ends NOT included.
Kit Includes :4-Link frame rails / 2″ x 3″ cross-member / D-shaft loop / 1 1/4″ 4130 tubes / Tube Adapters / MS Housing Brackets / MS Chassis Brackets / Diagonal link kit / Upper & Lower Shock Mounts / Grade 8 Hardware. Welding Required. All components available separately. Due to size of rails additional shipping charges will apply.
Bear’s Pro Bar 4-link clip (UNWELDED) if perfect for the do-it-yourselfer for Low HP race applications.
Kit Includes :4-Link frame rails / 2″ x 3″ cross-member / D-shaft loop / 1 1/4″ 4130 tubes / Tube Adapters / MS Housing Brackets / MS Chassis Brackets / Diagonal link kit / Upper & Lower Shock Mounts / Grade 8 Hardware / Strange Single Adjustable Shocks and spring rate of your choice. Welding Required. All components available separately. Due to size of rails additional shipping charges will apply.
Bear’s Standard 4-link clip (UNWELDED) if perfect for the do-it-yourselfer for Pro-Street and low HP race applications.
Rod Ends NOT included.
Kit Includes :4-Link frame rails / 2″ x 3″ cross-member / D-shaft loop / 1″ DOM tubes / Housing Brackets / Chassis Brackets / Diagonal link kit / Upper & Lower Shock Mounts / Grade 8 Hardware. Welding Required. All components available separately. Due to size of rails additional shipping charges will apply.