Due to current market conditions, website pricing may not be up to date.
Showing 705–720 of 920 resultsSorted by popularity
This easy to install package includes : assembled ladder bars, bolt on diagonal link, 2″ X 3″ cross member, adjustable lower shock mounts, upper shock mount cross member, 6″ stroke Strange single adjustable coil-overs and your choice of spring rate. Ladder Bars are powder coated for long term protection. Kit includes all rod ends and hardware.
This easy to install package includes : assembled ladder bars, bolt on diagonal link, tubular cross member, adjustable lower shock mounts, upper shock mount cross member, 6″ stroke Strange single adjustable coil-overs and your choice of Hypercoil spring. Ladder Bars are powder coated for long term protection. Kit includes all rod ends and hardware. Some Welding required.
Key Features :
All clips are UNWELDED and universal fit. Some welding required.
Key Features :
All clips are UNWELDED and are universal, welding required.
Mandrel bent crossmember, 2″ x 3″ x .083″. Crossmember is 60″ wide.
S-9015Â brackets welded to these universal fit mandrel bent Ladder Bar frame rails are 2″ x 3″ x .083″ and can be used in virtually any application, sold in pairs.
Universal fit mandrel bent ladder bar frame rails are 2″ x 3″ x .083″ and can be used in virtually any application, sold in pairs.
This kit is designed for your safety in case of rod end failure. Can be easily welded to any ladder bar assembly. Safety loops are powder coated and includes hardware.
Bear’s Ladders Bbars are among the best in the industry and come completely welded and assembled. Includes Adjustable shock mount brackets for 3″ or 3 1/4″ axle tube and 1/2″ or 3/8″ shock mount.
Key Features :Â – 1″ x .156″ seamless tubing – jig welded to ensure perfect alignment – forged rod ends (lifetime warranty) at housing for maximum strength – 34″ long from axle centerline to front rod end – powder coated for long term durability – adjustable lower bar for pinion angle adjustment.
Bear’s Ladders Bbars are among the best in the industry and come completely welded and assembled. Includes Standard L-Bar brackets for 3″ axle tube
Key Features :Â – 1″ x .156″ seamless tubing – jig welded to ensure perfect alignment – forged rod ends (lifetime warranty) at housing for maximum strength – 34″ long from axle centerline to front rod end – powder coated for long term durability – adjustable lower bar for pinion angle adjustment.
Bear’s ladder bar adjuster feature 3/4″ RH internal threads and 3/4″ left hand external threads. Makes adjusting pinion angle easy. Sold individually, jam nut not included.
This round tube crossmember kit fits most applications. Bent from 1 3/4″ x .134″ DOM and includes mounting tabs, front ladder bar brackets and grade 8 hardware. Crossmember width is 48″ with 3″ drop.
Bear’s Sportsman Anti-Roll bar kit is perfect for Strret Stip applications. Features 1″ x .156″ DOM tube, MS welded arms, Billet bearing loops with needle bearings for smooth operation. Chassis mounting tabs, 4130 link tube kit, rod ends and hardware included. Will fit 16″-23″ in arm centerline. Some welding required.
Bear’s HD Pro-Mod Anti-roll bar kit is perfect for the High Horsepower of Pro-Mod and Outlaw No-Prep cars. Kit features 1 5/8″ heat treated and gun-drilled 35 spline main shaft, Heat treated billet arms (6″) and spherical bearings with 4130 bearing housing for smooth operation. Shafts are avaialbe in 1″ increments starting at 16 1/8″ up to 24 1/8″ shaft length. Arm centerline is 3/4″ narrower than shaft length. (16 1/8″ shaft = 15 3/8″ CL). Kit includes AM rod ends, bearing mout tabs, hex links, housing tabs and AN hardware.
Bear’s Pro Anti-Roll bar kit is perfect for mid-high horsepower applications. Features 1 1/2″ x .120″ 4130 tube, 4130 welded arms, Billet bearing loops with needle bearings for smooth operation. Chassis mounting tabs, 4130 link tube kit, rod ends and hardware included. Will fit 24″-35″ in arm centerline. Some welding required.
1/2″ NAS 4-Link bolt kit.Includes 8 NAS-19 bolts with 1.178″ grip and grade 8 thin nylocks and AN washers. Works for 1/4″ thick brackets with 3/4″ gap.