Due to current market conditions, website pricing may not be up to date.
GM 10 & 12 Bolt Hybrid Axle Package With Special Eliminator kit & 1/2" Studs
1 × $1,042.50 
1350 U-Joint
1 × $52.50 Subtotal: $1,095.00
Showing 561–576 of 920 resultsSorted by popularity
Bear’s Mild Steel Fabricating housings are one of the strongest on the market. Perfect for mid to high horspower applications. This housing is completely TIG welded to your specifications.
Key Features :
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This 4130 housing is TIG welded and utilizes 3 1/4″ x .250″ 4130 tubes and is 40″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and 4130 brackets to finish it off. Complete housings also available.
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This 4130 housing is TIG welded and utilizes 3 1/4″ x .250″ 4130 tubes and is 40″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and 4130 brackets to finish it off. Complete housings also available.
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This Mild Steel housing is TIG welded and utilizes 3 1/4″ x .250″ 4130 tubes and is 50″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and brackets to finish it off. Complete housings also available.
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This Mild Steel housing is TIG welded and utilizes 3 1/4″ x .250″ DOM tubes and is 40″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and brackets to finish it off. Complete housings also available.
Bear’s 9″ Sheetmetal housings are designed for the serious racer and high horsepower applications. This 4130 housing is TIG welded and utilizes 3 1/2″ x .250″ 4130 tubes and is 40″ wide with centered pinion. Key features include 3/8″ ground faceplate (studs installed), faceplate support gussets, internal rear brace, back brace is fitted but not installed. Will accept 10″ gears (requires faceplate clearance). Add a pair of Bear’s housing ends and 4130 brackets to finish it off. Complete housings also available.
Bear’s 4130 Fabricating housing are one of the strongest on the market. Perfect for mid to high horsepower applications. This housing is completely TIG welded to your specifications.
Key Features :
Please complete and submit our Custom housing form and we will contact you with final pricing.
New HD 9″ center with 3″ x .250″ wall tubes. Fill/drain/brace and ends installed. Built to your specs and choice of ends. please complete Housing order form when ordering.
New 9″ HD housing with 3″ x .250″ axle tubes and face plate studs installed. Housing ends of choice included (Conv. Ends extra) and can be installed if required (additional cost). Housings built as ordered to your Specs. All Bear’s housings are fixture mounted and TIG welded.
After online order is placed one of our sales staff will contact you to finalize housing width and pinion location.
Bear’s HD stamped 9″ center with 3.00″ x .250″ axle tubes. Tubes installed at 55″ tube-tube with center pinion location. Add a set of Bear’s housing ends and brackets to complete the Job. Custom widths and pinion location available at now extra charge (may add to delivery time).
Bear’s HD stamped 9″ center with 3.00″ x .250″ axle tubes. Tubes installed at 45″ tube-tube with center pinion location. Add a set of Bear’s housing ends and brackets to complete the Job. Custom widths and pinion location available at now extra charge (may add to delivery time).
This package gets you started with a New HD 9″ Ford Housing with 3.00″ X .250″ DOM tubes, 31 spline Pro-Street axles, bearings, 1/2″ wheel studs and housing ends or your choice. Available in 45″ or 55″ width and based on center pinion.Face-plate studs are installed and housing ends are loose. Add a set of our brackets and install your 3rd member or a new one from Bear’s. Filler, drain and brace are available options. Axle and housing order forms must be completed in order to process your order.
Dana / Spicer 1350 series U-Joint w/grease fittings. Cup Diameter = 1 3/16″ Span = 3 5/8″. Spicer # 5-178X.
5/16″ diameter for 1310 / 1330 series yokes with 1 1/8″ cups, span equals 1.575″. Sold as a pair.
5/16″ diameter for 1310 / 1330 series yokes with 1 1/16″ cups, span equals 1.400″. Sold as a pair.