Strange Directional 4 Piston Caliper Kit With DTC-30 Semi Metallic Brake Pads
$675.00 CAD B-1850Designed Specifically For Drag Racing
Application
Strange Pro Series Brake Kits
See Description Tab below for additional Specifications.
Showing 113–128 of 921 resultsSorted by popularity
-
-
2-Piston Calipers w/ Pads
$360.00 CAD B-1825Designed Specifically For Drag Racing
Application
Strange Medium Duty Brake Kits
B4446WC / B4453WC / B4454WCSee Description Tab below for additional Specifications.
-
Strange Pro Series Rear Brake Kit For Late Big Ford / Torino Housing Ends
$1,250.00 CAD B-1706Designed Specifically For Drag Racing
Application
Brake Kit for Late Big Ford / Torino Housing EndsSee Description Tab below for additional Specifications
-
Strange Steel Rear Brake Kit (B-1700WC)
$1,192.50 CAD B-1700Designed Specifically For Drag Racing
Rear brake kit for 1957-1964 Oldsmobile housing endsSee Description Tab below for additional Specifications.
-
5/8″ Stud Sleeve Wrench
$12.16 CAD A-1027-BSleeve Installation Wrench
Fits notch on A1027C sleeve to simplify installation -
Large Ford Axle Bearing – 3.150″ x 1.531″
$79.95 CAD A-1020Sealed Ball Bearing – Sold Individually – 3.150″ OD x 1.531″ ID – Outer seal & o-ring eliminates inner axle seal – Includes locking collar Bearing & locking collar should be pressed on at room temperature Pre-heating is not recommended as collars can lose holding power Never “tack-weld” collars as damage to the axles heat…
-
Spindle Nut Wrench for 4 3/4″ & 5″ Floater Kit (2012 and later)
$89.95 CAD F-2058WSpindle Nut Wrench for 4 3/4″ & 5″ Floater kit (2012 and later)
Note:
This wrench is included in floater kit. -
3″ Moly Driveshaft
$599.95 CAD U-17003″ x .083″ chrome moly tubing, Dana/Spicer tube yokes & U-joints. Maximum length of tube is 54″. Every Bear’s driveshaft is T.I.G. welded and high speed balanced. Slip yoke not included. Driveshaft Order Form must be submitted with your order.
-
Strange GM C-Clip Axles (P-3020)
$579.95 CAD P-3020Alloy C-Clip Axles
Sold as a pair
Alloy axle packages are optimized for street & track use
See our Hy-Tuf axles for maximum torsional strength for all out Drag Racing
Fits factory width 67-69 Camaro or 64-67 Chevelle with OEM housing ends
For 70-72 Camaro or 68-72 Chevelle – See P3026See Description Tab below for additional Specifications.
-
Bear’s Pro Street Axles – single
$275.00 CAD A-3000-1Need to replace just one axle, no problem just fill out and submit our Axle Order Form with your order.
-
40 Spline Gun Drilled Axle Package
$1,312.50 CAD P-1014Designed Specifically For Drag Racing
Thru-hardening maximizes the torsional strength of Hy-Tuf axles
This also reduces the flexibility necessary for street driving
Alloy Axles are Unavailable in 40 SplineRequires
• Ford 9″ or Dana 60 with 3.150″ housing ends
• Ford 9″ using Strange 3.250″ or 3.812″ bore caseWeight Reduction
Gun-drilling removes approximately one pound per footAxle order form must be completed and submitted with order.
See Description Tab below for additional Specifications.
-
GM 10 & 12 Bolt Hybrid Axle Package With Special Eliminator kit & 1/2″ Studs
$1,042.50 CAD P-1011GOTOriginally designed for Oval track racing to eliminate axle and bearing failure
This allows for an axle & bearing combination not possible with any other housing end
Providing Drag Race axle torsional strength, while capable of handling heavy side loads
This is the ultimate package for multiple use vehicles
Street / Strip / Oval track
For Chevrolet applications using Small GM OEM housing ends and drum brakes
Or aftermarket disc brakes specifically designed for use with an eliminator kitApplication Available
8.2 10 bolt car 28 or 33 spline
8.5 10 bolt car 28, 30, or 33 spline
8.8 12 bolt car 30, 33, or 35 spline33 Spline Fits Only Yukon Posi Units & Strange Spools
**35 Spline Will Not Fit Mark Williams SpoolsSee Description Tab below for additional Specifications.
-
Race Axle Package – 5/8″ studs
$934.95 CAD P-1009Designed Specifically For Drag Racing
Thru-hardening maximizes the torsional strength of Hy-Tuf axles
This also reduces the flexibility necessary for street driving
Packages For Street & Track see– P3102 / P3502Axle Order Form must be submitted with order.
See Description Tab below for more Specifications.
-
9″ Ford w/ 3″ Tubes & Ends
$949.95 CAD H-1106New 9″ HD housing with 3″ x .250″ axle tubes and face plate studs installed. Housing ends of choice included (Conv. Ends extra) and can be installed if required (additional cost). Housings built as ordered to your Specs. All Bear’s housings are fixture mounted and TIG welded.
After online order is placed one of our sales staff will contact you to finalize housing width and pinion location.
Select options This product has multiple variants. The options may be chosen on the product page -
5-3248X conversion Joint
$57.20 CAD 5-3248X1330 (1 1/8″) / 1350 greaseable conversion joint. 1 1/8″ x 3.625″ x 1 3/16″ x 3.625″.
-
Driveshaft Safety Loop
Price range: $29.95 through $32.35 CADLoop is bent from 1″ x .065″, 6″ wide center-center.
Select options This product has multiple variants. The options may be chosen on the product page
