1/2″ X 2″ Wheel Stud Kit
$60.00 CAD A-10252″ Screw in stud kit for Bear’s / Strange axles (1/2″ x 20 thread) 10 studs with washers.
Showing 497–512 of 920 resultsSorted by popularity
-
-
Mustang Axle Bearing
$94.95 CAD A-1023Sealed Ball Bearing
- 2.834″ OD x 1.562″ ID
- Outer seal & o-ring eliminates inner axle seal
- Includes locking collar
Retainer Plate
- 2024 T-351 aluminum .250″ thick
- 3 3/8″ x 2″ bolt pattern with holes for 3/8″ studs
Bearing & locking collar should be pressed on at room temperature. Pre-heating is not recommended as collars can lose holding power
Never “tack-weld” collars as damage to the axles heat treat can occur -
Mopar Axle Bearing
$89.95 CAD A-1022Sealed Ball Bearing
- 2.875″ OD x 1.562″ ID
- Outer seal & o-ring eliminates inner axle seal
- Spirolox fits into groove on bearing OD to prevent movement
- Includes locking collar
Retainer Plate
- Stamped steel plate retains Spirolox against housing end
- Five on 3.75″ bolt pattern with holes for 3/8″ studs
- Includes gasket
For Old Style Bearing With Fixed Plate – See A1022OB
Bearing & locking collar should be pressed on at room temperature. Pre-heating is not recommended as collars can lose holding power
Never “tack-weld” collars as damage to the axles heat treat can occur. -
Bearing Retaining Ring (A-1021-B)
$10.75 CAD A-1021-BReplacement Locking Collar For A1021 Bearing
Axle Bearing Locking Collar
- Made from 4140 steel
- 2.093″ OD x 1.557″ ID x .625″ wide
- Fine finish on OD for seal surface
Cold Press Only
Heating can reduce holding power and ruin seal surface
Tack-welding can alter the axles heat treating and cause cracking -
Bearing Retaining Ring (A-1019-B)
$19.95 CAD A-1019-BLarge Ford and Oldsmobile axle bearing retainer ring (A-1019 / ID 1.767) for Bear’s and Strange axles only. This ring must be replaced when ever the bearing is removed. Sold individually.
-
Bearing Retainer Plate
$27.00 CADFord retainer plates. Sold individually. These retainer plates are cut to allow installation without removing the bearing.
Select options This product has multiple variants. The options may be chosen on the product page -
Drag Race 40 Spline Floater Kit With Carbon Brake Kit
Price range: $7,650.50 through $7,793.50 CADDesigned Specifically For Drag Racing
Requires:
Housing with 3 1/4″ or 3 1/2″ O.D. tubing
40 spline floater axlesSee Description Tab below for additional Specifications.
Select options This product has multiple variants. The options may be chosen on the product page -
Drag Race 40 Spline Floater Kit With Stainless Steel Brake Kit
Price range: $4,790.50 through $4,933.50 CADDesigned Specifically For Drag Racing Floater Kit – Choose 4 3/4″, 5″, or 5 1/2″ Bolt Circle Wheels
• Requires housing built with 3 1/4″ or 3 1/2″ O.D. tubes
• Floater axles – Sold separatelySee Description Tab below for additional Specifications.
Select options This product has multiple variants. The options may be chosen on the product page -
Spindle Nut Wrench for 4 3/4″ & 5″ Floater Kit (2012 and later)
$89.95 CAD F-2058WSpindle Nut Wrench for 4 3/4″ & 5″ Floater kit (2012 and later)
Note:
This wrench is included in floater kit. -
Spindle Nut Wrench for 5 1/2″ Floater kit (2012 and later)
$89.95 CAD F-2056MSpindle Nut Wrench for 5 1/2″ Floater kit (2012 and later)
Note:
This wrench is included in floater kit. -
Floater Hub Seal 2013+ Drag Race Floater Kits, Aluminum Pro Mod Rear Ends
$29.95 CAD F-2056KApplication
2013 & Newer Floater Kits
Aluminum Pro Mod Rear EndsDescription
Hub sealDimensions
3.876″ OD
0.4375″ Wide -
Strange 40 Spline Floater Axle – Solid
$337.50 CAD A-2140Description
Drag Race floater axle – 24″ or less
Machined from solid Hy-Tuf material
Solid axles have 9% more torsional strength than gun drilled** Sold individually
See Description Tab below for additional Specifications.
-
Strange 40 Spline 300M Floater Axle – Gundrilled
$672.10 CAD A-2040MDescription
Drag Race floater axle – 20″ or less
Machined from gun drilled 300M material
Gun drilling removes approximately 1 pound per foot** Sold Individually
See Description Tab below for additional Specifications.
-
Strange 40 Spline Floater Axle – Gundrilled
$299.95 CAD A-2040-24Description
Drag Race floater axle – 24″ or less
Machined from gun drilled Hy-Tuf material
Gun drilling removes approximately 1 pound per foot** Sold individually
See Description Tab below for additional Specifications.
<a class=”button” href=”https://bearsperformance.com/pdf/AXLE_FORM.pdf” target=”blank”>MORE INFORMATION (PDF)</a>
-
3 1/2″ Moly Driveshaft – Heavy Duty
$899.95 CAD U-17033 1/2″ x .083″ chrome moly tubing, Strange billet tube yokes & solid U-joints. Maximum length of tube is 60″. Every Bear’s driveshaft is T.I.G. welded and high speed balanced. Slip Yoke not included. Driveshaft Order Form must be submitted with your order.
-
3 1/2″ Moly Shaft w/ Spicer Yokes
$629.95 CAD U-17023 1/2″ x .083″ chrome moly tubing, Spicer tube yokes & U-joints. Maximum length of tube is 60″. Every Bear’s driveshaft is T.I.G. welded and high speed balanced. Slip Yoke not included.
Driveshaft Form must be submitted with order