Strut Cup Gusset
$1.95 CAD S-3411.125″ 4130 CM strut cup gusset.
Showing 1–16 of 920 resultsSorted by popularity
-
-
1350 Severe Duty U-Joint
$47.58 CAD U-1640Dana / Spicer 1350 series solid U-Joint without grease fittings. Cup Diameter = 1 3/16″ Span = 3 5/8″. Spicer # 5-1350X.
-
1/4″ 4130 Lower Doubler Plate
$27.50 CAD S-9048-BCNC machined from 1/4″ 4130, fits lower housing hole on our 4130 brackets. Holes should be reamed after install. Sold individually.
-
1/4″ 4130 Upper Doubler Plate
$21.25 CAD S-9048-ACNC machined from 1/4″ 4130, fits upper holes on 4130 Housing brackets. Holes should be reemed after install. Sold individually.
-
Jam Nut
Price range: $0.74 through $1.22 CADSold individually.
Select options This product has multiple variants. The options may be chosen on the product page -
1350 U-Bolt Kit
$18.00 CAD U-16103/8″ diameter U-Bolts for 1350 series U-Joints. Maximum torque of 30-35 ft lbs.
-
Pinto Rack & Pinion
$386.85 CAD S-3441This early Pinto rack is the most popular due to its lightweight construction and it easily adapts to most applications. Overall width = 46″.
9/16″-26 spline, tie-rods are 1/2″-20, 5″ rack travel / 3 3/4″ turns lock to lock. Use’s Bear’s S-3443 Billet rack mount, sold seperately.
-
New Axles
Fill out the form below with your required specifications. After submission your custom order will be added to your cart and you can log in or sign up to complete the order. We will contact you to finalize your order and provide your cost and delivery.
If any required fields are not known you can enter “unknown”, we will contact you to clarify.
-
Swing Out Bar Kit
$165.24 CADThis kit gives you everything needed to make a swing-out side bar. Kit includes Grade 8 bolt and detent pin. One kit does one bar.
Select options This product has multiple variants. The options may be chosen on the product page -
1/2″ X 3″ Wheel Stud Kit
$60.00 CAD A-10263″ Screw in stud kit for Bear’s / Strange axles (1/2″ x 20 thread) 10 studs with washers.
-
Ford 9″ – Daytona Bearing Kit
$94.95 CAD N-1916Application
OEM Ford 9″ Daytona support – N1914
Strange Street / Track billet support – N1917Includes
• Front pinion bearing
• Adjustable pinion preload spacer
• Rear pinion bearing
• Pinion sealNew Supports Are Supplied With Races & O-ring
Available separately -
9″ Ford – Eaton Truetrac Differential With 31 Spline Axles
$929.50 CAD N-1979Application – Ford 9″ with 31 spline axles
Description
Eaton 31 Spline Detroit Truetrac
A helical gear differential that offers smooth power transferSee Description Tab below for additional Specifications.
-
9″ Ford – Motive
Price range: $475.00 through $499.95 CADStandard Gears are the perfect choice for replacement of OEM gear sets
Providing long service life in Street, Street / Track, & Oval track vehicles
These gears can also be used in some Drag Race cars depending on weight & power
If tooth breakage occurs, then Pro Gears or a larger rear end will become necessarySee Description Tab below for additional Specifications.
Select options This product has multiple variants. The options may be chosen on the product page -
4130 Strut Cup
$59.95 CAD S-3410These 4130 strut cups make mounting Strange struts easy and neat. Sold in pairs.
-
Mild Steel Strut Cup
$42.95 CAD S-3409These make mounting Strange struts easy and neat. Sold in pairs. Machined from billet Mild Steel
-
Strange Stud Mount Aluminum Strut Package Single Adjustable With M/D Brake Kit For Hub Mount Wheels
$2,969.95 CAD PSS-115Drag Race Use Only
For Hub Mount Wheels
Choice of 4 1/2″ or 4 3/4″ bolt circleSee Description Tab below for additional Specifications.
Select options This product has multiple variants. The options may be chosen on the product page
