Due to current market conditions, website pricing may not be up to date. Dismiss
Ford 9" - Daytona Bearing Kit
1 × $94.95 
9" Ford Ring Gear Bolts / Posi
1 × $23.09 
5-134X Conversion Joint
1 × $34.34 
Pro Street Wheelie Bar Kit
1 × $427.95 
80" Pro Stock Wheelie Bar Kit
1 × $939.95 
Ladder Bar Suspension Package (less coilovers)
1 × $796.80 5-7438X Conversion Joint
1 × $49.25 
Mustang Axle Bearing
2 × $94.95 
8.8" Pinion Yoke
1 × $142.50 
.750" Steering Joint - Street
1 × $103.91 
5/8" Flange Nut
1 × $2.43 
2 Magnet Pick-Up Collar For Strange 9" Ford Premium 28 Spline Yokes
1 × $105.00 
1/2" X 2" Wheel Stud Kit
1 × $57.50 
Cable Ball joint (S-7010-R)
1 × $11.83 
#3 Bulkhead Union
1 × $8.25 
Sensor Ring / 8 Magnet
1 × $210.00 
9" Ford w/ 3" Tubes - 45" CP (H-1105-45)
1 × $649.95 
#3 Bulkhead Tee
1 × $25.06 
9" ARP Ring Gear Bolts - 1/2"
1 × $114.40 
Large Filler Cap Assy. - Steel
1 × $59.95 
Pinto Stud Adapters
1 × $49.95 
4 Magnet Pick-Up Collar For Strange Chrome Moly Yokes Will Not Fit Ford 9" Yokes
1 × $127.50 
HD Dana 60 Yoke
1 × $150.00 
Bearing Retaining Ring (A-1021-B)
1 × $10.75 
12 Bolt Pinion Yoke - Chrome Moly
1 × $233.82 
GM Double Adjustable Rear Shock
1 × $419.95 
Bear's Sheet Metal 9" - 4130 / 3 1/4" Tubes 40" CP
1 × $1,299.95 
Double Adjustable Coil-Over Strut 2010-2015 Camaro - Drag Race Only
1 × $744.95 Subtotal: $8,833.83
Showing 1–16 of 35 resultsSorted by popularity
Application
2016-2023 Camaro
Double Adjustable Steel Strut – Sold as Each
• Drag Race Only
• Reuses factory upper mount
• No provisions for sway bar link or brake line
• Spring not included
See Description Tab below for additional Specifications.
Application
2010-2015 Camaro
Double Adjustable Steel Strut – Sold as Each
• Drag Race Only
• Reuses factory upper mount & top nut
• No provisions for sway bar link or brake line
• Spring not included
See Description Tab below for additional Specifications.
1982-1992 Camaro
Description
Double Adjustable Steel Strut
Drag Race Only – Sold as each
See Description Tab below for additional Specifications.
2015-2023 Mustang
Description
Double Adjustable Steel Strut
Drag Race Only – Sold as each
See Description Tab below for additional Specifications
2005-2014 Mustang
Description
Double Adjustable Steel Strut
Drag Race Only – Sold as each
See Description Tab below for additional Specifications.
1987-2004 Mustang
With 8 cylinder spindles
Description
Double Adjustable Steel Strut
Drag Race Only – Sold as each
See Description Tab below for additional Specifications.
For Strange Aluminum Struts
Provides tubing parts to fabricate lower control arms
Rod ends designed for 1/2″ bolts
** Lower Control Arm Ends Sold Separately
4130 Seamless Chrome Moly Tubing
• Two 1.00″ O.D. x .058″ wall x 12″ long
• Two .875″ O.D. x .058″ wall x 18″ long
4130 Chrome Moly Tube Adapters
• Two .880″ O.D. threaded 1/2″-20
• Two .755″ O.D. threaded 1/2″-20
Teflon® Lined Chrome Moly Rod Ends
• Four 1/2″-20 shank / .500″ I.D. ball
• Four 1/2″-20 jam nut
For Strange Aluminum Struts
Provides tubing parts to fabricate lower control arms
Rod ends designed for 1/2″ bolts
Lower Control Arm Ends Sold Separately
See Description Tab below for additional Specifications.
Application
Strange Aluminum Struts
Lower Control Arm Ends
Outer end assemblies for fabricating lower control arms
Tube Kits Sold Separately
Lower Control Arm Ends
• 4130 chrome moly
• LH & RH with 45° integral weld bung
• 4130 chrome moly male clevises
• Teflon® lined spherical LCA bearings
• Spirolox® retaining rings
• Grade 8 bolts, flanged locking Jet nuts, & 3AN washers
For Strange Aluminum Struts
Provides tubing parts to fabricate lower control arms
Rod ends designed for 1/2″ bolts
Lower Control Arm Ends Sold Separately
4130 Seamless Chrome Moly Tubing
• Two 1.00″ O.D. x .058″ wall x 12″ long
• Two .875″ O.D. x .058″ wall x 18″ long
4130 Chrome Moly Tube Adapters
• Two .880″ O.D. threaded 1/2″-20
• Two .755″ O.D. threaded 1/2″-20
Teflon® Lined Chrome Moly Rod Ends
• Four 1/2″-20 shank / .500″ I.D. ball
• Four 1/2″-20 jam nut
Related
Lower control arm ends – S3750
Tube kit for 7/16″ bolts – S3420
For Strange Aluminum Struts
Provides tubing parts to fabricate lower control arms
Rod ends designed for 7/16″ bolts
Lower Control Arm Ends Sold Separately
4130 Seamless Chrome Moly Tubing
• Two 1.00″ O.D. x .058″ wall x 12″ long
• Two .875″ O.D. x .058″ wall x 18″ long
4130 Chrome Moly Tube Adapters
• Two .880″ O.D. threaded 1/2″-20
• Two .755″ O.D. threaded 1/2″-20
Teflon® Lined Chrome Moly Rod Ends
• Four 1/2″-20 shank / .4375″ I.D. ball
• Four 1/2″-20 jam nut
Related
Lower control arm ends – S3750
Tube kit for 1/2″ bolts – S3421
Application
Ultra Struts
Altered Ultra Struts
Description
Lower Control Arm Kit
For frame tabs using 1/2″ bolts
Provides parts necessary to fabricate lower control arms
See Description Tab below for additional Specifications.
Designed Specifically For Drag Racing
Application
Ultra Struts & Altered Ultra Struts
See Description Tab below for additional Specifications.
These 4130 strut cups make mounting Strange struts easy and neat. Sold in pairs.
These make mounting Strange struts easy and neat. Sold in pairs. Machined from billet Mild Steel