Due to current market conditions, website pricing may not be up to date.
No products in the cart.
Showing 113–128 of 147 resultsSorted by popularity
Kit includes 4 tubes .120″ thick 4130 @ 18″, 4 RH regular tube adapters and 4 LH Hex tube adapters. Welding required.
This kit works well for the extreme power and torque delivered by Higher HP cars. All brackets are laser cut and CNC machined from 1/4″ 4130 plate to make them the TRUEST bracket on the market. The housing brackets have 6 lower adjustment holes and have adjustable shock mount holes (3/8″ or 1/2″). NOTE : fixed shock mount bracket shown is NLA.
Kit Includes :
Add a set of Doubler Plates for added strength, available in 1/8″ or 1/4″ 4130. (must be reamed to size after installation).
This kit will do the job for most bracket cars. The brackets are laser cut from 3/16″ mild steel and accepts 5/8″ hardware. Available for 3″ and 3 1/4″ axle tubes. Rod ends not included, welding required.
Kit Includes :
* uses S-2375 or S-2395 rod ends (not included)
Bear’s Pro Street 4-Link kit features 3/16″ mild steel brackets (3″ or 3 1/4″ tube) and 1″ x .156″ x 17 1/2″ wall DOM threaded 4-link tubes. Jam nuts and 5/8″ Grade 8 hardware is included, Rod Ends sold separately.
Bear’s PRO MS 4-link brackets are designed and machined the same as our 4130 brackets without the expence of 4130. Each bracket is CNC machined and reemed for a tight tolerance. Fit 3″ axle tubes, uses 1/2″ hardware and 3/8″ shock mount. Sold individually.
CNC machined from 1/8″ 4130. Fits lower holes on our 4130 brackets. Holes should be reamed after install. Sold individually.
CNC machined from 1/8″ 4130. Fits upper holes on our 4130 brackets. Holes should be reamed after install. Sold individually.
Bear’s 4130 brackets are cnc machined from 1/4″ 4130, holes are reemed for tight tolerance. Fits 3 1/4″ axle tubes (3 1/2″ tube are available) and has 1/2″ adjustable shock mount. Works with Bear’s S-2437 or S-2438 shock mounts. Sold individually.
Bear’s 4130 brackets are cnc machined from 1/4″ 4130, holes are reemed for tight tolerance. Fits 3 1/4″ axle tubes (3 1/2″ tube are available) and has 3/8″ adjustable shock mount. Works with Bear’s S-2440 or S-2441 shock mounts. Sold individually.
Bear’s Pro 1/4″ Mild Steel chassis bracket is designed and machined same as our 4130 bracket without the cost. 1/2″ holes are reemed for tight tolerance and will work with 2″ x 3″ frame rails and round tube (nothcing required). Sold individually.
Designed to fit mandrel bent 2″ x3″ frame rails, 3/16″ mild steel, uses 5/8″ hardware. Priced individually.
Front 4-link brackets will work with round tube or 2″ x 3″ frame rails, 3/16″ mild steel, uses 5/8″ hardware. priced individually.
Bear’s PRO 1/4″ MS 4-link brackets are designed and machined the same as our 4130 brackets without the expence of 4130. Each bracket is CNC machined and reemed for a tight tolerance. Fit 3 1/4″ axle tubes, uses 1/2″ hardware and 1/2″ shock mount. Sold individually.
Bear’s Sportsman 4-link brackets are laser cut from 3/16″ Mild Steel. Fits a 3″ axle tube and uses 5/8″ hardware with 1/2″ adjustable shock mount. Sold individually.
Bear’s Sportsman 4-link brackets are laser cut from 3/16″ Mild Steel. Fits a 3 1/4″ axle tube and uses 5/8″ hardware with 1/2″ adjustable shock mount. Works with S-2437 or S-2438 shock mounts. Sold individually.
Bear’s Pro-Mod 4 link bracket is CNC machined from 1/4″ 4130, 1/2″ holes are reemed for tight tolerance and has fixed shock mount. Fits 3 1/2″ axle tubes. Sold individually.
Material: 4130