Due to current market conditions, website pricing may not be up to date.
No products in the cart.
Showing 193–208 of 923 resultsSorted by popularity
Bear’s tire cover (45″ x 32″) are a great way to keep tire pressures stable while in the lanes. Made from UV protective vinyl with felt backing to prevent marking. HD grommets installed with suction cups supplied. Sold individually.
Application Strange Front Carbon Brake Kits With single piston calipers Sold as Each Two required per caliper Not Compatible With Other Manufacturer’s Carbon Kits Specifications New – .460″ Discard – .200″ Contamination Material is easily contaminated by fluids Keep sprays away from pads and rotors Once affected, rotors & pads must be baked to remove…
Aluminum Support Cover Fits OEM Dana 60 and Strange S60 housings Not compatible with H1122 aluminum main caps Will Not Fit Strange S60 for ’93-’02 F-Body Clearance is limited due to gas tank design & location Features • Strategically designed ribs for improved stiffness and main cap support • Heat treated chromoly load bolts •…
App/Model: Ford 8.8 Cover Bolt Quantity: 10 Differential Model: Ford 8.8 Pinion Shaft Diameter: 1.626 Inch Pinion Spline Count: 30 Position: Rear Ring Gear Bolt Quantity: 10 Ring Gear Material: 8620 Steel Ring Gear Outside Diameter: 8.8 Inch Ring Gear Rotation: Standard For Ford 8.8″ (10 Bolt); Performance Ring and Pinion; 3.90 Ratio
Offers exceptional life in street applications This axle bearing is specifically design for continuous use Tapered rollers handle side loading much better than ball bearings Not A Replacement For A Sealed Ball Bearing This bearing requires an outer seal surface and a different bearing seat dimension Timken® Tapered Axle Bearing Assembly – 3.150″ OD x…
Sealed Ball Bearing – Sold Individually – 3.150″ OD x 1.772″ ID – Outer seal & o-ring eliminates inner axle seal – Includes locking collar Bearing & locking collar should be pressed on at room temperature Pre-heating is not recommended as collars can lose holding power Never “tack-weld” collars as damage to the axles heat…
For Axles Drilled And Tapped 5/8″-18
See Description Tab below for additional Specifications.
For Axles Drilled And Tapped 5/8″-18
See Description Tab below for additional Specifications.
M12-1.5 x 50mm Grade 8 Fully Threaded Bolts
• Threads are rolled for maximum strength
• Thin .200″ hex head provides additional clearance
• Length measured from underneath the head of the bolt
• 3/4″ wrench size
.0625″ Hardened Washers
• Prevents galling
• Ensures hex remains true to backside of axle flange
Application
Street or Street and Track vehicles
Design to fit wheels larger than 15″
By using a super shim kit you can eliminate the use of stock carrier shims. They are easier to work with and allow a more positive gear set-up through assured retention of your shims.
Fits Mopar 8 3/4″ and Oldsmobile. Includes Timken bearings and races.
