1/4″ 4130 Lower Doubler Plate
$27.50 CAD S-9048-BCNC machined from 1/4″ 4130, fits lower housing hole on our 4130 brackets. Holes should be reamed after install. Sold individually.
Showing 1–16 of 146 resultsSorted by popularity
-
-
1/4″ 4130 Upper Doubler Plate
$21.25 CAD S-9048-ACNC machined from 1/4″ 4130, fits upper holes on 4130 Housing brackets. Holes should be reemed after install. Sold individually.
-
Pro Mild Steel 4-Link Bracket 3″ Tube
$62.95 CAD S-9037Bear’s PRO MS 4-link brackets are designed and machined the same as our 4130 brackets without the expence of 4130. Each bracket is CNC machined and reemed for a tight tolerance. Fit 3″ axle tubes, uses 1/2″ hardware and 1/2″ shock mount. Sold individually.
-
2″ x 3″ Ladder Bar Bracket
$14.95 CAD S-9016Front ladder bar bracket for 2″ x 3″ crossmember, 5 3/4″ holes, laaser cut from 3/16″ mild steel. Sold individually.
-
1/4″ MS Ladder Bar Bracket w/ Shock Mount (3″ axle tube)
$26.95 CAD S-9010Bear’s Ladder bar bracket, fits 3″ axle tube, 1/2″ shock mount holes. Laser cut from 1/4″ MS, Sold individually. For 3 1/4″ tube see S-9011.
-
Bear’s Billet Rack Mount W/ brackets
$81.95 CAD S-3444Bear’s Billet Aluminum rack mount. Fits Early rack (S-3441). Black anodized, includes plated hardware, mounting plate and gusset.
-
Pinto Rack & Pinion
$399.95 CAD S-3441This early Pinto rack is the most popular due to its lightweight construction and it easily adapts to most applications. Overall width = 46″.
9/16″-26 spline, tie-rods are 1/2″-20, 5″ rack travel / 3 3/4″ turns lock to lock. Use’s Bear’s S-3443 Billet rack mount, sold seperately.
-
Ladder Bar Adjuster
$24.95 CAD S-2127Bear’s ladder bar adjuster feature 3/4″ RH internal threads and 3/4″ left hand external threads. Makes adjusting pinion angle easy. Sold individually, jam nut not included.
-
Sportsman Anti-Roll Bar – 36″
$249.95 CAD S-6680-36Bear’s Sportsman Anti-Roll bar kit is perfect for Strret Stip applications. Features 1″ x .156″ DOM tube, MS welded arms, Billet bearing loops with needle bearings for smooth operation. Chassis mounting tabs, 4130 link tube kit, rod ends and hardware included. Will fit 24″-35″ arm centerline. Some welding required.
-
Pro Anti-Roll Bar – 36″
$448.75 CAD S-6675-36Bear’s Pro Anti-Roll bar kit is perfect for mid-high horsepower applications. Features 1 1/2″ x .120″ 4130 tube, 4130 welded arms, Billet bearing loops with needle bearings for smooth operation. Chassis mounting tabs, 4130 link tube kit, rod ends and hardware included. Will fit 24″-35″ in arm centerline. Some welding required.
-
Pro Anti-Roll Bar
$438.55 CAD S-6675Bear’s Pro Anti-Roll bar kit is perfect for mid-high horsepower applications. Features 1 1/2″ x .120″ 4130 tube, 4130 welded arms, Billet bearing loops with needle bearings for smooth operation. Chassis mounting tabs, 4130 link tube kit, rod ends and hardware included. Will fit 16″-23″ in arm centerline. Some welding required.
-
Spring Loaded Adjuster
$97.15 CAD S-2001Spring loaded assembly for wheelie bar, fits 1 1/8″ x .058″ tubing. Sold individually.
-
Tie Rod Tube Kit – MM Rod Ends
$71.35 CAD S-6642Bear’s tie rod tube kits can be easily adapted to fit most applications. Kit includes two 1/2″ MM rod ends (left hand), threaded tubes and hardware. Tubes may have to be modified for your application.
-
Pinto Stud Adapters
$54.95 CAD S-6640Designed by Bear’s, these stud adapters allow you to use a rod end in place of a traditional tie rod. Sold in pairs and includes mis-alignment washers. Fits Mustang II spindles and accepts 1/2″ rod end. Sold as pair.
-
SFI Steering Column Kit
$523.75 CAD S-6603Bear’s SFI steering column kit includes: 5 bolt Strange SFI quick release hub, 4130 outer tube, 2 lengths (42″) of 4130 3/4″ inner tubes, steering column bushings, Mil-Spec joint and 10/32 NAS bolts. Rack coupler/joint sold seperately.
-
Bear’s Billet Rack Mount
$75.95 CAD S-3443Bear’s Billet Aluminum rack mount. Fits Early rack (S-3441). Black anodized, includes plated hardware.
