Pinion Depth Shim Kit
$28.60 CAD N-19629″ Ford pinion depth shim kit (3/8″ holes)
Showing 97–112 of 126 resultsSorted by popularity
-
-
-
9″ Ford Pinion Seal
$16.95 CAD N-1960Application
OEM & Aftermarket Tapered Bearing Pinion Supports
Using 28 spline pinion gearDimensions
3.00″ OD x 1.765″ ID x .455″ wide
For 35 Spline Pro Gear – N1961 -
9″ Ford Tail Bearing Retainer
$6.95 CAD N-1941Application
• OEM 9″ Ford Cases
• Strange L/W Aluminum, S-Series, & Pro Iron CasesSecures Tail Bearing in Case
For Tail Bearing – N1940 -
9″ Tail Bearing
$49.95 CAD N-1940Application
• OEM 9″ Ford Cases
• Strange L/W Aluminum, S-Series, & Pro Iron CasesRecommend To Be Replaced Every Gear Change
Especially when an excessive amount of metal is present in the gear oilRelated
Tail bearing retainer – N1941For Strange HD Pro, Ultra, or Billet Case – N1943
-
9″ Selective Shim Kit
$24.95 CAD N-1925-SApplication
28 Spline Pinion
OEM Ford 9″ Daytona support
Strange Street / Track supportAdvantages
• Maintains proper bearing preload
• Allows for yoke removal without altering preload
• Simplifies pinion seal replacement -
Pinion Nut – Large Pinion
$17.16 CAD N-1922-BFor Ford 9″ 35 and 40 Spine Pinions ** Except Ultra Case with Ball Bearing Support – N1922F / N1922G• 1″ x 14 TPI flanged nut
• Self-locking – Red Loctite® additionally recommended
• 1 1/2″ wrench size -
Pinion Nut – Stock Pinion
$10.50 CAD N-1922-AFor Ford 9″ 28 Spline Pinion
• 3/4″ x 20 TPI flanged nut
• Self locking
• 1 1/16″ wrench size -
Bear’s / Strange Pinion Support
$214.95 CAD N-1922Heavy duty Drag Race pinion support. It uses even larger front and rear pinion bearings than the Daytona or N1917, further increasing load capabilities to suit the most demanding requirements. Manufactured from billet aluminum. Oil channels have been reduced to allow more material around the race sections to maximize rigidity.
It can accept either 28 or 35 spline pinion gears, and comes in a clear anodized finish. The support is supplied with front and rear races installed, bolts, washers, and an O-ring. Bearing & seal kit is available separately. Manufactured from 2024-T4 billet aluminum.
-
2 pc. Shim Kit – 35 spline Pinion
$37.50 CAD N-1919Application
Strange Pinion Supports
N1921Â /Â N1922
N2322Â /Â N2323
N1952AÂ /Â N1953A
N1950AEÂ /Â N1950AF
For Other Supports – N1925 / N1920HKAdvantages
• Maintains proper bearing preload
• Allows for yoke removal without altering preload
• Simplifies pinion seal replacementIncludes
• Shim carrier
• Shim cover
• .004″, .005″, .006″, .007″, .008″, .010″ shims -
Pinion Yoke Spacer Kit
$23.33 CAD N-1918Pinion yoke spacer kit. Required when using Strange U-1603 Yoke on any of these pinion supports. N-1915, N-1916 and N-1917
-
Ford 9″ Daytona Cast Pinion Support With Races Installed
$169.95 CAD N-1914Street, Street / Strip, and Track Use
Fits Ford 9″ casesNodular Iron Body
• Machined for Daytona size races
• Features large oil channel
• Fits 28 spline pinion
• Front & rear races installedO-ring & Support Bolts Are Not Included
-
Load Bolt Assembly For Strange Billet Case
$57.50 CAD N-1910TFits Strange Billet Case only
Benefit
The load bolt offers additional support during extreme conditions such as tire shake
The steel tip is initially adjusted very close to the backside of the ring gear
If deflection occurs, it provides added support to engagement of the ring and pinionNote
Will not work with lightened ring gears
Many Motive Performance ring gears come already lightenedIncludes
Hollow load bolt with steel insert
Locking nut
O-ring -
Load Bolt for Ultra-case / HD Aluminum Case
$57.50 CAD N-1910HFits Strange Ultra Case and HD Pro Case
Benefit
The load bolt offers additional support during extreme conditions such as tire shake
The steel tip is initially adjusted very close to the backside of the ring gear
If deflection occurs, it provides added support to engagement of the ring and pinionNote
Will not work with lightened ring gears
Many Motive Performance ring gears come already lightenedIncludes
Hollow load bolt with steel insert
Locking nut
O-ring -
Strange Billet Aluminum 9″ Ford HD 40 Spline Lightweight Steel Spool 10″ Pro Gear & Moly Yoke
BP-425-10Designed Specifically For Drag Racing
This Center Section & Gear Set May Not Fit Your Housing
Refer to the clearance diagrams shown on this pageSee Description Tab below for additional Specifications.
-
Strange Billet Aluminum 9″ Ford HD 40 Spline Lightweight Steel Spool 35 Spline Pro Gear & Moly Yoke
$7,249.95 CAD BP-425Designed Specifically For Drag Racing
This Center Section & Gear Set May Not Fit Your Housing
Refer to the clearance diagrams shown on this pageSee Description Tab below for additional Specifications.
Select options This product has multiple variants. The options may be chosen on the product page