1310 / 1330 U-Bolts -1 1/8" 
12 Bolt - Car Master Kit 
S-Series Ford 9" Pinion Yoke 
Load Bolt Assembly For Strange Billet Case 
Bear's 12 Bolt Forged Yoke 
Standard 4-Link Bracket - 3 1/4" tube 
5-213X 
Strange HD 1350 U-Bolt kit 
Oldsmobile Housing Ends 9″ ARP Ring Gear Bolts – 7/16″
$85.80 CAD N-19687/16″ ARP 12 point ring gear bolts with washers (set of 10). Same as Strange part # N-1975.
Showing 1–16 of 22 resultsSorted by popularity
-
-
9″ ARP Ring Gear Bolts – 1/2″
$114.40 CAD N-19671/2″ ARP 12 point ring gear bolts with washers (set of 10). Same as Strange part # N-1976.
-
9″ Ford Ring Gear Bolts / Posi
$23.09 CAD N-1965-P7/16″ x 1 1/4″ Grade 8 Ring Gear bolts (10 pcs) for POSI applications.
-
9″ Ford Ring Gear Bolts
$14.95 CAD N-19657/16″ x 7/8″ grade 8 ring gear bolts for spool application (set of 10).
-
9″ Ford Gasket – Steel
$39.95 CAD N-1963-HDFord 9″
Description
Premium Center Section Gasket
Produced by LubeLocker®Features
Silicone imprinted faces
Able to seal in difficult situations
Steel inner core -
-
Strange Ultra Case Pinion Depth Shim Kit
$74.20 CAD N-1962UCPinion Depth Shim kit for Strange Ultra-Case
-
-
-
9″ Ford Pinion Seal
$16.95 CAD N-1960Application
OEM & Aftermarket Tapered Bearing Pinion Supports
Using 28 spline pinion gearDimensions
3.00″ OD x 1.765″ ID x .455″ wide
For 35 Spline Pro Gear – N1961 -
9″ Ford Tail Bearing Retainer
$6.95 CAD N-1941Application
• OEM 9″ Ford Cases
• Strange L/W Aluminum, S-Series, & Pro Iron CasesSecures Tail Bearing in Case
For Tail Bearing – N1940 -
9″ Tail Bearing
$49.95 CAD N-1940Application
• OEM 9″ Ford Cases
• Strange L/W Aluminum, S-Series, & Pro Iron CasesRecommend To Be Replaced Every Gear Change
Especially when an excessive amount of metal is present in the gear oilRelated
Tail bearing retainer – N1941For Strange HD Pro, Ultra, or Billet Case – N1943
-
9″ Selective Shim Kit
$24.95 CAD N-1925-SApplication
28 Spline Pinion
OEM Ford 9″ Daytona support
Strange Street / Track supportAdvantages
• Maintains proper bearing preload
• Allows for yoke removal without altering preload
• Simplifies pinion seal replacement -
Pinion Nut – Large Pinion
$17.16 CAD N-1922-BFor Ford 9″ 35 and 40 Spine Pinions ** Except Ultra Case with Ball Bearing Support – N1922F / N1922G• 1″ x 14 TPI flanged nut
• Self-locking – Red Loctite® additionally recommended
• 1 1/2″ wrench size -
Pinion Nut – Stock Pinion
$10.50 CAD N-1922-AFor Ford 9″ 28 Spline Pinion
• 3/4″ x 20 TPI flanged nut
• Self locking
• 1 1/16″ wrench size -
Bear’s / Strange Pinion Support
$214.95 CAD N-1922Heavy duty Drag Race pinion support. It uses even larger front and rear pinion bearings than the Daytona or N1917, further increasing load capabilities to suit the most demanding requirements. Manufactured from billet aluminum. Oil channels have been reduced to allow more material around the race sections to maximize rigidity.
It can accept either 28 or 35 spline pinion gears, and comes in a clear anodized finish. The support is supplied with front and rear races installed, bolts, washers, and an O-ring. Bearing & seal kit is available separately. Manufactured from 2024-T4 billet aluminum.