4130 D-Shaft Loop Coupler HD Splined Steering Joint – Needle Bearing
$94.77 CADHD steering joint with .750″ bore.
Select options
This product has multiple variants. The options may be chosen on the product page
Showing 1–16 of 28 resultsSorted by popularity
-
-
U-16-N Series Splined Steering Joint – Needle Bearing
Price range: $94.77 through $100.66 CADU-16-N series for street application. With .750″ bore.
Select options This product has multiple variants. The options may be chosen on the product page -
Splined Steering Joint – Needle Bearing
Price range: $109.19 through $109.95 CADSplined HD steering joint, 3/4″ smooth w/ needle bearing.
Select options This product has multiple variants. The options may be chosen on the product page -
Tie Rod Tube Kit – AM Rod Ends
$91.50 CAD S-6643Bear’s tie rod tube kits can be easily adapted to fit most applications. Kit includes two 1/2″ AM rod ends (left hand), threaded tubes and hardware. Tubes may have to be modified for your application.
-
Tie Rod Tube Kit – MM Rod Ends
$71.35 CAD S-6642Bear’s tie rod tube kits can be easily adapted to fit most applications. Kit includes two 1/2″ MM rod ends (left hand), threaded tubes and hardware. Tubes may have to be modified for your application.
-
Pinto Stud Adapters
$49.95 CAD S-6640Designed by Bear’s, these stud adapters allow you to use a rod end in place of a traditional tie rod. Sold in pairs and includes mis-alignment washers. Fits Mustang II spindles and accepts 1/2″ rod end. Sold as pair.
-
Steering Column Firewall Seal
$39.95 CAD S-6610Rivet or bolt to your firewall and seal around your steering column. Seals around a 3/4″ diameter steering column and has a 3″ OD.
-
SFI Steering Column Kit
$523.75 CAD S-6603Bear’s SFI steering column kit includes: 5 bolt Strange SFI quick release hub, 4130 outer tube, 2 lengths (42″) of 4130 3/4″ inner tubes, steering column bushings, Mil-Spec joint and 10/32 NAS bolts. Rack coupler/joint sold seperately.
-
3 Bolt Hub Steering Column Kit
$244.03 CAD S-6601Bear’s steering column kit. Includes outer tube / 2 pcs. of 3/4″ inner tube/ bushings / 3 bolt quick release hub and steering joint. Coupler or joint for rack sold separately.
-
.750″ Steering Joint – Street
$103.91 CAD S-6517HD Street application steering u-joint. 1.50″ OD with 3/4″ x 3/4″ smooth.
-
.562″ x 26 x.750″ Steering Joint
$84.95 CAD S-6515Fits Pinto/Mustang rack, .562″ x 26 spline with 3/4″ smooth boore.
-
Mil-Spec Steering Joint
Price range: $160.00 through $172.34 CAD S-6514LW Mil-Spec steering joint, pre-greased, 3/4″ x 3/4″. NAS BOLTS suggested for locking into postion.
Select options This product has multiple variants. The options may be chosen on the product page -
Steering Coupler – .750″ x 36
$29.95 CAD S-6503Fits Ford, power GM, manual Mustang. Spline = .750″ x 36Â Bore = .750
-
Steering Coupler – .625″ x 36
$29.95 CAD S-6501Fits Vega / Corvair box. Spline = .625″ x 36Â Bore = .750.
-
Pinto / Mustang Coupler
$27.95 CAD S-6500.562″ x 26 spline with .750 smooth bore coupler. Fits Pinto / Mustang, not for street use.
-
Tie Rod Fabrication Kit
$249.95 CAD S-3449Tie Rod Kit For Strange Steering Rack – S3448 / S3448-195
Components necessary to construct tie rod endsTubing
• 4130 seamless chrome moly
• .625″ O.D. x .120″ wall
• Two 12″ long piecesTubing Must Be Cut to Length & Threaded
Requires 7/16″-20 taps in both RH & LH threadsRod Ends
• Chrome moly
• Teflon® lined
• .560″ wide ball / 7/16″-20 shank / RH threads
• .560″ wide ball / 7/16″-20 shank / LH threads
• .812″ wide ball / 7/16″-20 shank / RH threads
• .812″ wide ball / 7/16″-20 shank / LH threads
• .4375″ I.D. spherical ballAdditional Components
• (2) 7/16″-20 RH jam nuts
• (2) 7/16″-20 LH jam nuts
• (4) 7/16″ O.D. x 3/8″ I.D. bushings
• (2) 3/8″-24 x 1 1/2″ grade 8 bolts
• (2) 3/8″-24 ESNA nuts