Due to current market conditions, website pricing may not be up to date.
Showing 33–48 of 60 resultsSorted by popularity
Strange 12 Bolt Complete Rear End – Less Brakes
33 spline axles, Eaton Truetrac Differential & 1/2″ or 12mm studs
No additional charge for custom width
1982-1992 Camaro / Firebird / Trans Am
• Aftermarket torque arm may need to be modified
See Description Tab below for additional Specifications.
Application
1979-2004 Mustang
Description
Strange HD Ford 9″ bolt-in housing
Custom widths available at no additional charge
See Description Tab below for additional Specifications.
Application
Bolt-in housing for 2005-2014 Mustang
Description
Strange HD Ford 9″ housing
With upper & lower control arm mounts and housing ends
Custom widths available at no additional charge
See Description Tab below for additional Specifications.
This is a custom-made part that can be ordered via our custom parts order form.
Application
Bolt-in housing for factory leaf spring vehicles
Custom widths available at no additional charge
Description
HD Ford 9″ Housing
Choice of leaf spring mounts & housing ends
See Description Tab below for additional Specifications.
This is a custom-made part that can be ordered via our custom parts order form.
Application
GM 12 Bolt Car Housings
Replaces thin cast iron main caps
Cast iron caps can flex, crack, & break
Billet aluminum is much more ductile
Increased flexibility make it much less prone to breakage
Thicker material further increases overall strength
See Description Tab below for additional Specifications.
Application
GM 8.5 10 Bolt Housings
Will Not Fit 68-70 Oldsmobile Housings
See Description Tab below for additional Specifications.
Strange Engineerings NEW 12 Bolt HD center with 3″ tubes and ends of your choice installed. Built to your specs. Housing ends of your choice included but not installed.
Application
12 Bolt Housing Fabrication
For F-body or leaf spring applications
Accepts 3″ O.D. housing tubing
Nodular Iron Casting
• Premium nodular iron
• Chrome moly main caps
• Torque arm provision
• Pick-up sensor hole
• Accepts 12 bolt internal components
• Designed & machined by Strange
• Cast in USA
3 Channel ABS
Will not accept OEM sensor
Requires plug, O-rings, screw, sensor & O-ring
4 Channel ABS or Without ABS
Requires plug, O-rings, & screw
Application
Dana 60 Housings
Will Not Fit Strange S60
See Description Tab below for additional Specifications.
Strange S60 Housing with 3″ x .250″ tubes installed, built to any width and pinion location. Housing ends sold separately.
This S60 housing is cast from premium Nodular Iron and had adjuster nuts for precise and easy set-ups. Tubes welded 360 degrees and is machined for pinion snubber.
Strange S60 Housing with 3″ x .250″ tubes and ends of your choice (Loose), built to any width and pinion location. Please complete Housing order Form when ordering.
This S60 housing is cast from premium Nodular Iron and had adjuster nuts for precise and easy set-ups. Tubes welded 360 degrees and is machined for pinion snubber.
Application
Drag Race Vehicles
Using 16″, 17″, 18″, 19″, 20″, 21″, 22″ or 23″ 4-Link Centers
Centered Pinion
Choice of 4 3/4″ or 5″ bolt circle
Description
Strange Ultra 4-Link Modular Housing Package
Includes two piece axles & Pro Series II stainless steel brake kit
Note
4-Link Plates & Center Section Sold Separately
See Description Tab below for more Specifications
Application
Drag Race Vehicles with 16″, 17″, 18″ or 19″ 4-Link Centers
20″, 21″, 22″ & 23″ will become available in March 2018
Centered Pinion
Choice of 4 3/4″ or 5″ bolt circle
Description
Strange Ultra 4-Link Modular Housing Package
Includes two piece axles & carbon brake kit
Note
4-Link Plates & Center Section Sold Separately
See Description Tab below for more Specifications
Pro Mod Floater Housing
Includes stainless steel brake kit
• Available in 16″, 17″, 18″, 19″, 20″, 21″, 22″, or 23″ 4-link centers
• Choice of 4 3/4″, 5″, or 5 1/2″ bolt circle
4-Link Plates, Axles, & Center Section Sold Separately
Advantages
• Housing supports weight, bending loads, and tire shake
• Axle shafts only requirement is to transfer torque
• Prevents the possibility of axle flange breakage
• Extremely rigid assembly increases gear life
• Lighter than comparable fabricated steel housings
See Description Tab below for more Specifications
Application
Pro Mod Vehicles
Using 16″, 17″, 18″, 19″, 20″, 21″, 22″, or 23″ 4-link centers
Description
Ultra 4-Link Modular Floater Housing Assembly
Includes Pro Carbon brake kit
Choice of 4 3/4″, 5″, or 5 1/2″ bolt circle
Note
4-Link Plates, Axles, & Center Section Sold Separately
See DESCRIPTION TAB below for more Specifications
This rear brace kit comes in 2 pieces, all braces are based on a centered pinion and are available from 34″ – 54″ (Housing width) in 2″ increments. Braces are laser cut and formed to fit our HD 9″ Centers (notch back style). Some final fitting is required. Please specify Housing width when ordering.