Strange Directional 4 Piston Caliper Kit With DRM-35 Metallic Brake Pads
$619.95 CAD
Designed Specifically For Drag Racing
Application
For Pro Series & Pro II Steel Rear Brake Kits
** The Pad Material In This Kit Is Unsafe For Front Brake Applications
See Description Tab below for additional Specifications.
Description
Kit Includes
Four Piston Aluminum Directional Calipers with Stainless Steel Pistons – B5002 / B5004
– Aluminum bodies drastically reduce weight
– Pistons are 1.625″ & 1.750″ to vary pressure on the pads decreasing pad taper
– Stainless steel pistons are corrosion resistant
– Anti-rattle clips reduce brake pad vibration and noise
Bolt Kit
– Four 3/8″-24 x 1.125″ grade 8 bolts
– Four 3/8″ ID .125″ thick washers
– Sixteen 3/8″ ID .025″ thick stainless steel alignment shims
Hard Metallic Brake Pad – B5020
– Provides high resistance to brake fade
– Recommended for vehicles going over 150 MPH in the 1/4 mile
– Maintains decent starting-line cold holding capabilities
– May leave pad residue on rotors that requires removal when pads are changed
Brake Hoses and Lines Are Not Included
Calipers are tapped 1/8″ NPT and supplied with male 3 AN fittings
Use Teflon® tape or liquid on the 1/8″ NTP threads of the fitting.
Leave a few threads from the tip uncoated to avoid depositing material inside.
Torque to 25 ft lbs.