Due to current market conditions, website pricing may not be up to date.
No products in the cart.
Showing all 13 resultsSorted by popularity
Application
Wilwood 2 piston caliper
Specifications
New – .490″
Discard – .200″
Soft Metallic Brake Pad
– Provides the best starting-line cold holding power
– Only material suitable for use in front steel applications
Application
Strange 11″ Carbon Brake Kits With 4 Piston Calipers
Characteristics
Slot decreases surface area creating a faster rise in temperature
Brakes become effective sooner and at lower MPH
Directs brake dust out of the caliper
See Description Tab below for additional Specifications.
Application
Strange 11″ Carbon Brake Kits With 4 Piston Calipers
Characteristics
Slot decreases surface area creating a faster rise in temperature
Brakes become effective sooner and at lower MPH
Directs brake dust out of the caliper
See Description Tab below for additional Specifications.
Application
Strange 11″ & 11.5″ Carbon Brake Kits With 4 Piston Calipers
Specifications
New – .450″
Discard – .200″
Contamination
Material is easily contaminated by fluids
Keep sprays away from pads and rotors
Once affected, rotors & pads must be baked to remove impurities
Rotors must be removed from any aluminum parts before baking
Bake at 500° for 8 hours or 1000° for 4 hours
Contaminated carbon will smoke or produce odors during this process
Notes
Sold as each
Not Compatible With Other Manufacturer’s Carbon Kits
Applications
Strange Steel Rear Brake Kits
Material Not Suitable For Front Applications
DRM-40 Metallic Brake Pad
• Provides the highest resistance to brake fade
• Recommended for vehicles going over 150 MPH in the 1/4 mile
• Pad residue on rotor surface greatly reduced over hard pads
Sold as Each
Two pads required per caliper
Specifications
New – .480″
Discard – .200″
Applications
Several Strange Steel Rear Brake Kits
Specifications
New – .480″
Discard – .200″
Hard Metallic Brake Pad
– Provides high resistance to brake fade
– Recommended for vehicles going over 150 MPH in the 1/4 mile
– Maintains decent starting-line cold holding capabilities
May leave pad residue on rotors
Residue should be removed when pads are replaced
Sold as each
Not To Be Used In Front Brake Applications
Applications
All Strange Front Steel Brake Kits with 4 Piston Calipers
Several Strange Steel Rear Brake Kits
Specifications
New – .480″
Discard – .200″
Soft Metallic Brake Pad
– Provides the best starting-line cold holding power
– Only material suitable for use in front steel applications
– Recommended for the rear in vehicles going 150 MPH or less in the 1/4 mile
Sold as each
Universal Replacement for Obsolete Pads
For Single Piston Calipers
AirHeart 175H
Kelsey Hayes KH400
Wilwood 120-1064
Specifications
New – .350″
Discard – .200″
Soft Metallic Brake Pad
– Provides the best starting-line cold holding power
– Pad is 1.600″ OD / 1.492″ OD undercut on backside
Polymatrix pads for Wilwood 4-piston calipers, sold individually.
Applications
Wilwood and JFZ 4 piston calipers
Specifications
New – .480″
Discard – .200″
Hard Metallic Brake Pad
– Provides high resistance to brake fade
– Recommended for vehicles going over 150 MPH in the 1/4 mile
– Maintains decent starting-line cold holding capabilities
– May leave pad residue on rotors that requires removal when pads are changed
Sold as each
Not To Be Used In Front Brake Applications
Applications
Wilwood and JFZ 4 piston calipers
Specifications
New – .480″
Discard – .200″
Soft Metallic Brake Pad
– Provides the best starting-line cold holding power
– Only material suitable for use in front steel applications
– Recommended for the rear in vehicles going 150 MPH or less in the 1/4 mile
Sold as each
Applications
Strange Steel Front Brake Kits
Using Single or 2 Piston Calipers
Specifications
New – .480″
Discard – .200″
Soft Metallic Brake Pad
– Provides excellent starting-line cold holding power
Application
Strange Front Carbon Brake Kits With Single Piston Calipers
Specifications
New – .460″
Discard – .200″
Contamination
Material is easily contaminated by fluids
Keep sprays away from pads and rotors
Once affected, rotors & pads must be baked to remove impurities
Rotors must be removed from any aluminum parts before baking
Bake at 500° for 8 hours or 1000° for 4 hours
Contaminated carbon will smoke or produce odors during this process
Notes
Sold as each
Not Compatible With Other Manufacturer’s Carbon Kits
For 4 piston carbon calipers – See L4050H